PRODUCTS TO USE :

• Prosthetics;
• 36W UV lamp ;
• PH Control Pro Line;
• UV base coat;
• Original UV topcoat;
• UV varnish (colors of your choice);
• Isopropyl alcohol 99.9%
• Resin Point;
• 3-sided white sanding block;
• File 180/180;
• Construction gel

INSTRUCTIONS FOR USE (with prostheses):

1. File the surface of the nail with a sanding block
2. Clean the nail with alcohol or pH control as needed
3. Glue the prosthesis with the pointed resin
4. File the prosthesis and clean with alcohol
5. Apply a base coat and bake for 30 seconds
6. For a natural curve, apply a building gel and cure for 60 seconds
7. Degrease the builder gel with alcohol
8. File the surface of the gel for an even surface
9. Degrease with alcohol
10. Apply a thin layer of base and bake for 30 seconds
11. Apply your UV polish color and cure for 60 seconds
12. Repeat step 11
13. Apply a top coat and bake for 60 seconds
14. Degrease with alcohol if the finish requires degumming

INSTRUCTIONS FOR USE (without prosthesis):

1. File the surface of the nail with a sanding block
2. Clean the nail with alcohol or pH control as needed
3. Apply a base coat and bake for 30 seconds

4. File the surface of the gel for an even surface

5. Apply your UV polish color and cure for 60 seconds
6. Repeat step 5
7. Apply a top coat and bake for 60 seconds
8. Degrease with alcohol if the finish requires degumming